UL / FM Listed Angle Style Fire Pump Relief Valves with Optional Waste Cone

Available in Flange x Flange, Flange x Groove and Groove x Groove End Configurations. Underwriters Listed at 300 psi. Opens quickly, maintains pressure within close limits. Wide range adjustability –65 psi-180 psi (4.5 –12.4 bar). Pilot operated main valve. Reduced cavitation design. Simple field adjustable pressure setting, no special tools or downtime necessary. Closes gradually for surge free operation. Available with Flange x Flange, Flange x Groove and Groove x Groove Ends.

angle fire pump relief valve with waste cone

Downloads

UL / FM Pressure Relief Valves – Angle or Straight – Bronze Body

Available in Flange x Flange, Flange x Groove and Groove x Groove End Configurations. UL / FM Pressure Relief Valve limits inlet pressure by relieving excess pressure. Pressure sustaining prevents pipe line pressure from rising to a maximum valve. Operates over a Wide Flow Range. Inlet Pressure Adjustment Range: 65-300psi. Quick opening and adjustable closing speed. Rated Working Pressure 300 psi. UL 1478 Listed and FM 1361 Approved.

Downloads

UL Listed Pressure Relief Valve

Limits inlet pressure by relieving excess pressure. Operates over a wide flow range. Pressure setting is adjustable with a single screw. Quick opening with adjustable closing speed. Available in Flange x Flange, Flange x Groove, and Groove x Groove Ends.

Downloads

UL / FM / AWWA C508 Swing Check Valve

UL / FM at 350 psi, the highest rated pressure in the industry. Full Waterway design offers exceptionally low-pressureloss at high flow rates. Resilient Seated Design. Valve can be dis-assembled,and maintenance performed without removal from the pipeline. Face to Face dimension to ASME B16.1. Flanges ANSI B16.1, Class 125, Flat Faced, or ASME B16.42, Class 150 Raised Face.

Downloads

UL / FM – High Performance – NRS Gate Valve – EPC Model

14”-24” NRS Gate Valve with the highest UL / FM Rated Pressure in the Industry. 300 psi UL / FM rating – 1200 psi proof of design test, 100% of valves tested to UL / FM Standards at 2:1 Safety Factor prior to shipment. Available as Post Indicator Valve – with Model F0601-IP Geared Indicator Post Also available with Operating Nut or Hand Wheel. Flange x Flange. ANSI B16.1, Class 125, ASME B16.42, Class 150. Raised Face or Flat Face. … Continued

ul fm nrs gate valve

Downloads

UL / FM OS&Y – High Performance – OS&Y Gate Valve – EPC Model

14”-24” OS&Y Gate Valve with the highest UL / FM Rated Pressure in the Industry. 300 psi UL / FM rating – 1200 psi proof of design test, 100% of valves tested to UL / FM Standards at 2:1 Safety Factor prior to shipment. Flange x Flange. ANSI B16.1, Class 125, ASME B16.42, Class 150. Raised Face or Flat Face. Available with special alloy materials and Linings / Coatings for use with Sea Water in EPC Projects. Contact the factory … Continued

14 to 24 OS&Y Gate Valve EPC

Downloads

UL Listed Pre-Action Valves

Pneumatically actuated, double-interlocked Pre-Action Valve; utilizes a Deluge Dry Pipe Valve and a Pneumatic Pilot System. It is controlled by the pressure maintained in the release system and supervisory pressure maintained in the sprinkler piping system. Vertical or Horizontal Installation. Flanged or Grooved Ends available. UL Rated Working Pressure – 300 psi. Max. Air Supply Pressure – 30 psi.

Downloads

FIG. 9701 Air Relief Valve – Threaded NPT – UL / FM

Air release valves permit trapped air to be released from piping systems without losing water pressure. The small orifice releases air under pressure during normal pipeline operation. The float is connected to the vent via a linkage mechanism which is capable of operating the vent under full pipeline pressure. Rated at 300 psi. UL Listed, FM Approved. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard.

Downloads

UL Listed Pressure Reducing Valve

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends to EN 1092-2, PN-16, ANSI B16.1, Class 125. Grooved Ends to AWWA C606. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550.

Downloads

FM Approved Pressure Reducing Valve

Reduces a higher inlet pressure to lower outlet pressure. Provides a consistent outlet pressure over a wide flow range. Pilot operated main valve is not subject to pressure fall-off. Outlet pressure is adjustable with a single screw. Can be maintained without removal from the pipeline. Flanged Ends to EN 1092-2, PN-16, ANSI B16.1, Class 125. Grooved Ends to AWWA C606. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550.

Downloads

UL Listed F0511-175

UL Listed Y Strainer meets or exceeds the requirements of UL 321 Standard NPT Blow-Off Outlet on Cover. ASTM A276, Type 304 Stainless Steel Screen. Excellent flow characteristics. Low pressure loss at high flow rates. Flanged Ends to ANSI / ASME B16.1, Class 125. Other flanges available on request. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550.

Downloads

UL Listed F0522-175

Y Strainer meets or exceeds the requirements of UL 321 Standard NPT Blow-Off Outlet on Body and Cover. ASTM A276, Type 304 Stainless Steel Screen. Excellent flow characteristics. Low pressure loss at high flow rates. Grooved Ends to AWWA C606 Standard. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550.

Downloads